Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Giant's Adjustable Angle Stem gives you the custom fit. The 31.8mm handlebar diameter works nicely with modern bars. Place your handlebars high for upright, easy-riding comfort, or go low for a more forward, aggressive position.
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
The Odyssey TDFL (Tom Dugan Front Load) stem is Tom Dugan's signature top load stem that features a 51mm reach and 28mm rise. It's made from 6061 aluminum and is offered in 45mm and 53mm lengths — the shorter length to cater to today’s needs. An Odyssey pre-load bolt sits flush with stem when mounted properly. - Weight: 11oz. - Stem type: Front Load
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm
Introducing the Onyx stem. Using cold forging technology rather than CNC machining, this stem has an incredibly smooth and unique shape but also strength advantages over a traditional CNC machined stem. - Cold-forged deisgn for strength, asthetics and value - Weight saving internal machining - STC (Shark Tooth Clamping) for increased grip - Steerer Clamp Diameter: 1-1/8" ins - Weight (oz): 11.15 - Stem Type: Top Load
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
The Dune stem top loader looks incredibly clean thanks to a sunken area for the fork top bolt.This sturdy unit features a taller 31mm rise and an extra wide clamping area to hold your bars extra tight. - 6061-T6 alloy, cold forged with full cnc finish - 6mm micro head bolts - Unique offset rear for improved clamping - CNC machined underside for weight reduction
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
Vision's Sizemore Stem is made of light and durable forged and CNC-machined 6061 T6 aluminum with a 2-bolt front clamp for easy handlebar installation even with clip-on aero bars. This fine stem includes tough M6 bolts and flip/flop graphics that look right whichever way you install the stem.
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
MSW 17° stems raise the bar--literally--for what riders can expect from an inexpensive stem. Available in lengths from 60-120mm for custom-fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
$76.00 - $76.99
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Steep descents, nasty rock gardens and high speed: all in a day's work for TruVativ's burly Holzfeller Stem. Made from oversize 3D forged aluminum for serious strength, the Holzfeller takes gravity-fueled abuse like a champ. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the direct BoXXer mounting delivers pinpoint steering precision and stiffness.
FSA's OS-190 Stem is a worthy upgrade for your favorite two-wheeled machine. It's made of forged and machined aluminum, so it's light, durable and strong enough for any road or mountain riding adventure.
With the best materials and construction, torsional stiffness fit for the hardest riding and biggest jumps, and the great style that's in all of Thomson's components, their Direct-Mount Stem is the perfect upgrade for your DH rig. It's made of tough 7000-series aluminum bar stock with heat-treated bolts and it has a 65mm-wide handlebar clamp so you get rock-solid steering and control and outstanding durability.
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Page 1 of 4 Next page