Accessories

When you want to carry water on your back—and almost nothing else—the Katari 3 has you covered. Low profile but high quality, you'll reach for this pack before your next quick pedal (or ski, or hike) and hardly notice it's there. An airmesh-covered backpanel and rolled soft-edge shoulders deliver excellent ventilation, comfort, and stability, while allowing for full range of motion. A dedicated external sleeve holds an included 2.5-liter reservoir and stretch-mesh side pockets let you grab bars, gloves, and other small essentials on the go. Clip your tail light on the bottom loop to quell any concerns about making it out of the trail before the sun makes its way to the horizon. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets

When you don't need to carry much except water and a few essentials, the women's-specific Kitsuma 7 is an ideal hydration-carrying solution for bike rides and beyond. A vertical-zip front compartment is big enough for a spare tube, multi-tool, and light windbreaker. Behind it, a separate external sleeve stores an included 2.5-liter reservoir with a magnetic sternum-strap attachment for the bite valve. An AirScape backpanel features outstanding ventilation via airmesh-covered foam and a center air channel. A super-light and airy harness with rolled, soft edges make for a pack so stable and comfortable you'll barely notice it. Side mesh pockets store things you'll want to access easily, like food or arm warmers. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets - Front panel vertical zip compartment with tool organization

Riders looking for a low-profile lumbar pack with integrated hydration need look no further than the Seral 4. This slim waistpack features a 1.5-liter bladder with our updated high-strength magnetic coupling for improved hose management even in rough terrain. the Seral 4 has enough storage capacity for ride essentials, such as a spare tube, CO2 and multi-tool and, of course, snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5 L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Main compartment tool organization and internal zippered pocket - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

The Garmin XL Combo mount by K-Edge is the next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1030, 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. The K-Edge advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. Compatibility - All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately). - Supported Computers: Garmin Edge 1030, 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights - Includes Garmin Pro XL Combo Mount and mounting hardware - CNC Machined 6061 T6 Aluminum - Fits 31.8mm handlebars - New clamp design is hinged for ease of installation - Weight: 64g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Note: Assembly bolts not meant to be removed or tampered with at any time.

NiteRider's Lumina 550 will guide you safely home. This bright light puts out up to 550 lumens for up to 18 hours and weighs in at only 172 grams! It attaches easily and fits on handlebars up to 31.8mm in diameter. There are five modes to choose from: high, medium, low, energy-saving walk, and flash. You can charge it off a computer's USB port and, should you throw it in a bag for later use, the Lumina's lock out mode ensures it won't accidentally turn on and waste battery life.

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. LUMINA MICRO 650 - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. LUMINA MICRO 650 - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.

The NiteRider Sentinel 150 incorporates three powerful LEDs to produce a retina-searing, daylight-visible, 150 lumens that allow you to be seen day or night. The Sentinel has 5 modes, is USB rechargeable, and has a unique safety feature — Laser Lanes! The Laser Lanes mode is designed to project ultra-bright laser lines on the ground, giving the rider their own virtual lane, further increasing visibility. - The Sentinel 150 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - Class leading ultra bright 150 lumen output - All in one, Laser and tail light! - Compatible with round and aero seat posts - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, water resistant

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. SWIFT 300 - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Swift 300 and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES SWIFT 300 - LED Head Light - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. SWIFT 500 - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY The Swift 500 Boost and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES SWIFT 500 - LED Head Light - Internal Li-Ion Battery - Built-in, Handlebar Mount - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount

LESS IS MORE. Don’t let getting your bike ready get in the way of taking off. The Control Tower 2 provides the stability and power you need to get your tires where you like them in no time flat. The proven AutoHead is compatible with most common tire valves and the 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3" gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180 psi rating

The Linus Shopper makes running errands a breeze. Made from durable waxed canvas, the Shopper is perfectly sized for a full grocery bag to slide right in the top. It clips easily to your rear rack and folds up and out of the way when it’s not in use.

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket - Sold with Avenue R-75 COB style taillight - Rear light includes 6 modes - Side illumination ports

- End link locking point for extensive holding power - 4-sided 3t manganese steel chain links - 4 digit resettable combination over 10,000 codes - Patent pending lock head design - Combo Safe Program - Product dimensions: Length 120cm - Product weight: 4.50 lbs

Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 12.7mm hardened PERFORMANCE STEEL SHACKLE - New Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 2.9 lbs (1.32 kgs)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes 4’ KRYPTOFLEX DOUBLE LOOPED CABLE for securing front wheel or accessories - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.65 lbs (1.66 kgs)

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights

Winner of the Eurobike Award, Hiplok LITE is a secure, wearable chain lock. LITE weighs just over 1kg yet protects your bike with a Sold Secure approved 8mm hardened-steel shackle with anti-pick locking cylinder and 6mm hardened-steel chain. Hiplok’s trusted patented wearable design, which adjusts to fit the rider without being locked to the body, provides a safe way to take a tough chain lock with you. Includes 3 x keys and Hiplok’s Lifetime Warranty guarantee.

The original wearable bike lock. Hiplok ORIGINAL is a high-security chain lock with a Sold Secure rated hardened-steel chain and 12mm hardened-steel shackle. With Hiplok’s patented belt fastening, it adjusts to fit the waist while riding without being locked to the body, providing an easy way to take a tough chain lock with you. ORIGINAL comes with 3 coded replaceable keys, a toughened-nylon, removable, washable sleeve and Hiplok’s Lifetime Warranty guarantee.

The billboard Dutchy pannier is an easy access “trunk” for your bicycle. Modeled from the proven Dutch-style bike panniers, these bags will turn your bike into a grocery hauling machine. This pannier incorporates a universal mount system that easily fits any rack. When you reach your destination, the bags can be removed and used as totes to transport your belongings with a haul handle or a shoulder strap. They are made from upcycled billboards and banners from all over the United States. Note: Photos of the bags may not reflect the actual color. Each one is made with upcycled nylon, so colors and prints will vary. Materials: - Upcycled Billboard and Banners - Upcycled Truck Tarp Vinyl - Nylon and Metal Hardware - Metal Rack Hooks - HDPE Plastic Framesheet - Hook & Loop - Dimensions: 13 H x 13 W x 8 D in./330.2 x 330.2 x 203.2 mm - Capacity: 1352 cu. in./22 L - Weight: 2 lb. 6 oz./1077 g Features: - Large main compartment fits groceries and more - Weather resistant gussets - Reflective webbing light loops - Folds flat when not in use - Can be easily removed and carried with a strap - Plastic frame can be used as a cutting board - Large main compartment - Adjustable to fit most racks - Built in Colorado - Made in the USA - Limited Lifetime Warranty

The Freerider is a simple pannier for a lifestyle on the go. When you need to carry your pack, groceries, or gym clothes, this pannier features an open top for convenient loading. Two simple cinch straps keep your belongings secure. Note: Photos of the bags may not reflect the actual color. Each one is made with upcycled nylon, so colors and prints will vary. Materials: - Upcycled Colorful Nylon Fabrics - Nylon Fabric - Nylon Hardware and Metal Hardware - Hook and Loop - Upcycled Street Sign - Metal Rack Hooks - HDPE Plastic Framesheet - Dimensions: 12 L x 16 H x 10 D in./304.8 x 406.4 x 254 mm - Capacity: 1920 cu. in./31 L - Weight: 2 lb. 5 oz./1134 g Features: - Adjustable to fit most racks - Adjustable side straps - Haul handles - Reflective triangle - Built in Colorado - Made in the USA - Limited Lifetime Warranty

Giant's Axact 13W is a great way to get the most out of your rides. This wireless computer tracks an impressive thirteen essential functions, including distance, ride time, current, average, and max speeds, plus eight more. It has a large, easy-to-read display, and features auto start, stop, and sleep modes. A low battery indicator on the Axact let's you know when it's about time to open the easy coin-release cap and put in a new battery.